|
Electric Transit, Inc. (ETI) was a joint venture between the Škoda group in the Czech Republic and AAI Corporation in the United States which made trolleybuses for the Dayton and San Francisco trolleybus systems, constructing a total of 330 trolleybuses. ETI was formed in 1994, and ownership was divided as 65% by Škoda and 35% by AAI. The latter was a wholly owned subsidiary of United Industrial Corporation. Up to that time, Škoda had built more than 12,000 trolleybuses since 1935,〔Wilkins, Van. "New Electric Trolley Buses in Dayton", in ''Bus World'' (ISSN 0162-9689). Summer 1996, p. 18.〕 but none for cities outside Europe and Asia. ==History and production== The company was awarded its first contract in November 1994, when the Miami Valley Regional Transit Authority, of Dayton, Ohio placed an order for 63 two-axle trolleybuses.〔Miami Valley Regional Transit Authority (now GDRTA) (Nov. 1, 1994). “RTA Awards Official Contract for 63 New Electric Trolleybuses.” ''Press release''.〕 The order was later reduced to 61 vehicles,〔''Trolleybus Magazine (TM)'' No. 206, March–April 1996.〕 and ultimately to 57.〔''TM'' No. 207, May–June 1996.〕 Three prototype trolleybuses were delivered in December 1995 and January 1996.〔 These were designated by ETI as model 14TrE, the E standing for "export", and were given fleet numbers 9601-9603 by MVRTA.〔 Following modifications to the design, construction of the 54 production-series ETI trolleybuses for Dayton took place in 1998-99. These were model 14TrE2 and were numbered 9801-9854 in MVRTA's fleet. Among the modifications were the moving of the wheelchair lift from the rear door to the front door, which necessitated widening the body from to and changing from a one-piece windshield to a two-piece one.〔 In July 1997, the San Francisco Municipal Railway (Muni) contracted with ETI for the provision of 250 trolleybuses, comprising 220 standard/two-axle () and 30 articulated () vehicles.〔Finnie, Chuck (June 1, 1999). “Muni trolley firm in crisis”, ''San Francisco Examiner'', p. A-1.〕 ETI designated the two types for San Francisco as models 14TrSF and 15TrSF, respectively. In February 2000, Muni exercised contract options to purchase an additional 20 two-axle and three articulated vehicles. Two prototypes for the two-axle trolleybuses (numbered 5401-2) were received by Muni in January 1999 and June 1999, respectively, while an articulated prototype (No. 7101) was received in April 2000. The 238 production-series two-axle trolleybuses (Nos. 5403-5640) were delivered between May 2001 and early 2004. The production-series articulateds (7102-7133) were all delivered in 2003. All 273 of Muni's ETI trolleybuses had entered service by April 2004.〔''TM'' No. 256, July–August 2004.〕 With both the Dayton and San Francisco orders, the chassis/body-frame (or shell) and motors of each vehicle were fabricated at Škoda's plant in Ostrov nad Ohří, Czech Republic, then shipped to a facility in Hunt Valley, Maryland (near other AAI facilities) for initial fitting-out. Except in the case of the prototypes, final fitting-out was undertaken in leased premises located in the two cities purchasing the vehicles, Dayton and San Francisco. ETI originally was based in Dayton,〔 but after completion of the contract for that city, the Dayton office was closed and ETI moved its administrative office to Hunt Valley, sharing space with partner AAI there. In 2003, ETI engaged in a competitive bidding for a large contract (245 trolleybuses) being offered by TransLink, of Vancouver, B.C., Canada for supply of trolleybuses to the Vancouver trolleybus system, but lost out to New Flyer Industries.〔Bouc, Frantisek (July 15, 2004). ("Trolley bus maker hits the brakes". ) ''The Prague Post''.〕 The joint venture did not seek any further new business, and in May 2004 it finalized an agreement with San Francisco Muni to transfer to Muni its remaining contractual obligations.〔United Industrial Corporation: May 4, 2004 news release.〕 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Electric Transit, Inc.」の詳細全文を読む スポンサード リンク
|